Search for: All records

Abstract There is great interest in improving our understanding of the respective roles of the ocean and atmosphere in variability and change in weather and climate. Due to the sparsity of sustained observing sites in the open ocean, information about the air–sea exchanges of heat, freshwater, and momentum is often drawn from models. In this paper observations from three long-term surface moorings deployed in the trade wind regions of the Pacific and Atlantic Oceans are used to compare observed means and low-passed air–sea fluxes from the moorings with coincident records from three atmospheric reanalyses (ERA5, NCEP-2, and MERRA-2) and from CMIP6 coupled models. To set the stage for the comparison, the methodologies of maintaining the long-term surface moorings, known as ocean reference stations (ORS), and assessing the accuracies of their air–sea fluxes are described first. Biases in the reanalyses’ means and low-passed wind stresses and net air–sea heat fluxes are significantly larger than the observational uncertainties and in some case show variability in time. These reanalyses and most CMIP6 models fail to provide as much heat into the ocean as observed. In the discussion and conclusions section, long-term observing sites in the open ocean are seen as essential, independent benchmarks not only to document the coupling between the atmosphere and ocean but also to promote collaborative efforts to assess and improve the ability of models to simulate air–sea fluxes. 

A budget approach is used to disentangle drivers of the seasonal mixed layer carbon cycle at Station ALOHA (A Long‐term Oligotrophic Habitat Assessment) in the North Pacific Subtropical Gyre (NPSG). The budget utilizes data from the WHOTS (Woods Hole—Hawaii Ocean Time‐series Site) mooring, and the ship‐based Hawai'i Ocean Time‐series (HOT) in the NPSG, a region of significant oceanic carbon uptake. Parsing the carbon variations into process components allows an assessment of both the proportional contributions of mixed layer carbon drivers and the seasonal interplay of drawdown and supply from different processes. Annual net community production reported here is at the lower end of previously published data, while net community calcification estimates are 4‐ to 7‐fold higher than available sediment trap data, the only other estimate of calcium carbonate export at this location. Although the observed seasonal cycle in dissolved inorganic carbon in the NPSG has a relatively small amplitude, larger fluxes offset each other over an average year. Major supply comes from physical transport, especially lateral eddy transport throughout the year and entrainment in the winter, offset by biological carbon uptake in the spring. Gas exchange plays a smaller role, supplying carbon to the surface ocean between Dec‐May and outgassing in Jul‐Oct. Evaporation‐precipitation (E‐P) is variable with precipitation prevailing in the first half and evaporation in the second half of the year. The observed total alkalinity signal is largely governed by E‐P with a somewhat stronger net calcification signal in the wintertime.

 

Estimates of turbulence kinetic energy (TKE) dissipation rate (ε) are key in understanding how heat, gas, and other climate‐relevant properties are transferred across the air‐sea interface and mixed within the ocean. A relatively new method involving moored pulse‐coherent acoustic Doppler current profilers (ADCPs) allows for estimates ofεwith concurrent surface flux and wave measurements across an extensive length of time and range of conditions. Here, we present 9 months of moored estimates ofεat a fixed depth of 8.4 m at the Stratus mooring site (20°S, 85°W). We find that turbulence regimes are quantified similarly using the Obukhov length scaleand the newer Langmuir stability length scale, suggesting that ocean‐side friction velocityimplicitly captures the influence of Langmuir turbulence at this site. This is illustrated by a strong correlation between surface Stokes driftandthat is likely facilitated by the steady Southeast trade winds regime. In certain regimes,, whereis the von Kármán constant andis instrument depth, and surface buoyancy flux capture our estimates ofwell, collapsing data points near unity. We find that a newer Langmuir turbulence scaling, based onand, scalesεwell at times but is overall less consistent than. Monin‐Obukhov similarity theory (MOST) relationships from prior studies in a variety of aquatic and atmospheric settings largely agree with our data in conditions where convection and wind‐driven current shear are both significant sources of TKE, but diverge in other regimes.

 

Abstract Upper-ocean turbulence is central to the exchanges of heat, momentum, and gasses across the air/sea interface, and therefore plays a large role in weather and climate. Current understanding of upper-ocean mixing is lacking, often leading models to misrepresent mixed-layer depths and sea surface temperature. In part, progress has been limited due to the difficulty of measuring turbulence from fixed moorings which can simultaneously measure surface fluxes and upper-ocean stratification over long time periods. Here we introduce a direct wavenumber method for measuring Turbulent Kinetic Energy (TKE) dissipation rates, ϵ , from long-enduring moorings using pulse-coherent ADCPs. We discuss optimal programming of the ADCPs, a robust mechanical design for use on a mooring to maximize data return, and data processing techniques including phase-ambiguity unwrapping, spectral analysis, and a correction for instrument response. The method was used in the Salinity Processes Upper-ocean Regional Study (SPURS) to collect two year-long data sets. We find the mooring-derived TKE dissipation rates compare favorably to estimates made nearby from a microstructure shear probe mounted to a glider during its two separate two-week missions for (10 −8 ) ≤ ϵ ≤ (10 −5 ) m 2 s −3 . Periods of disagreement between turbulence estimates from the two platforms coincide with differences in vertical temperature profiles, which may indicate that barrier layers can substantially modulate upper-ocean turbulence over horizontal scales of 1-10 km. We also find that dissipation estimates from two different moorings at 12.5 m, and at 7 m are in agreement with the surface buoyancy flux during periods of strong nighttime convection, consistent with classic boundary layer theory. 

This dataset consists of the Surface Ocean CO2 Atlas Version 2022 (SOCATv2022) data product files. The ocean absorbs one quarter of the global CO2 emissions from human activity. The community-led Surface Ocean CO2 Atlas (www.socat.info) is key for the quantification of ocean CO2 uptake and its variation, now and in the future. SOCAT version 2022 has quality-controlled in situ surface ocean fCO2 (fugacity of CO2) measurements on ships, moorings, autonomous and drifting surface platforms for the global oceans and coastal seas from 1957 to 2021. The main synthesis and gridded products contain 33.7 million fCO2 values with an estimated accuracy of better than 5 μatm. A further 6.4 million fCO2 sensor data with an estimated accuracy of 5 to 10 μatm are separately available. During quality control, marine scientists assign a flag to each data set, as well as WOCE flags of 2 (good), 3 (questionable) or 4 (bad) to individual fCO2 values. Data sets are assigned flags of A and B for an estimated accuracy of better than 2 μatm, flags of C and D for an accuracy of better than 5 μatm and a flag of E for an accuracy of better than 10 μatm. Bakker et al. (2016) describe the quality control criteria used in SOCAT versions 3 to 2022. Quality control comments for individual data sets can be accessed via the SOCAT Data Set Viewer (www.socat.info). All data sets, where data quality has been deemed acceptable, have been made public. The main SOCAT synthesis files and the gridded products contain all data sets with an estimated accuracy of better than 5 µatm (data set flags of A to D) and fCO2 values with a WOCE flag of 2. Access to data sets with an estimated accuracy of 5 to 10 (flag of E) and fCO2 values with flags of 3 and 4 is via additional data products and the Data Set Viewer (Table 8 in Bakker et al., 2016). SOCAT publishes a global gridded product with a 1° longitude by 1° latitude resolution. A second product with a higher resolution of 0.25° longitude by 0.25° latitude is available for the coastal seas. The gridded products contain all data sets with an estimated accuracy of better than 5 µatm (data set flags of A to D) and fCO2 values with a WOCE flag of 2. Gridded products are available monthly, per year and per decade. Two powerful, interactive, online viewers, the Data Set Viewer and the Gridded Data Viewer (www.socat.info), enable investigation of the SOCAT synthesis and gridded data products. SOCAT data products can be downloaded. Matlab code is available for reading these files. Ocean Data View also provides access to the SOCAT data products (www.socat.info). SOCAT data products are discoverable, accessible and citable. The SOCAT Data Use Statement (www.socat.info) asks users to generously acknowledge the contribution of SOCAT scientists by invitation to co-authorship, especially for data providers in regional studies, and/or reference to relevant scientific articles. The SOCAT website (www.socat.info) provides a single access point for online viewers, downloadable data sets, the Data Use Statement, a list of contributors and an overview of scientific publications on and using SOCAT. Automation of data upload and initial data checks allows annual releases of SOCAT from version 4 onwards. SOCAT is used for quantification of ocean CO2 uptake and ocean acidification and for evaluation of climate models and sensor data. SOCAT products inform the annual Global Carbon Budget since 2013. The annual SOCAT releases by the SOCAT scientific community are a Voluntary Commitment for United Nations Sustainable Development Goal 14.3 (Reduce Ocean Acidification) (#OceanAction20464). More broadly the SOCAT releases contribute to UN SDG 13 (Climate Action) and SDG 14 (Life Below Water), and to the UN Decade of Ocean Science for Sustainable Development. Hundreds of peer-reviewed scientific publications and high-impact reports cite SOCAT. The SOCAT community-led synthesis product is a key step in the value chain based on in situ inorganic carbon measurements of the oceans, which provides policy makers with critical information on ocean CO2 uptake in climate negotiations. The need for accurate knowledge of global ocean CO2 uptake and its (future) variation makes sustained funding of in situ surface ocean CO2 observations imperative. 

Abstract. Ship-based time series, some now approaching over 3 decades long, are critical climate records that have dramatically improved our ability to characterize natural and anthropogenic drivers of ocean carbon dioxide (CO2) uptake and biogeochemical processes. Advancements in autonomous marine carbon sensors and technologies over the last 2 decades have led to the expansion of observations at fixed time series sites, thereby improving the capability of characterizing sub-seasonal variability in the ocean. Here, we present a data product of 40 individual autonomous moored surface ocean pCO2 (partial pressure of CO2) time series established between 2004 and 2013, 17 also include autonomous pH measurements. These time series characterize a wide range of surface ocean carbonate conditions in different oceanic (17 sites), coastal (13 sites), and coral reef (10 sites) regimes. A time of trend emergence (ToE) methodology applied to the time series that exhibit well-constrained daily to interannual variability and an estimate of decadal variability indicates that the length of sustained observations necessary to detect statistically significant anthropogenic trends varies by marine environment. The ToE estimates for seawater pCO2 and pH range from 8 to 15 years at the open ocean sites, 16 to 41 years at the coastal sites, and 9 to 22 years at the coral reef sites. Only two open ocean pCO2 time series, Woods Hole Oceanographic Institution Hawaii Ocean Time-series Station (WHOTS) in the subtropical North Pacific and Stratus in the South Pacific gyre, have been deployed longer than the estimated trend detection time and, for these, deseasoned monthly means show estimated anthropogenic trends of 1.9±0.3 and 1.6±0.3 µatm yr−1, respectively. In the future, it is possible that updates to this product will allow for the estimation of anthropogenic trends at more sites; however, the product currently provides a valuable tool in an accessible format for evaluating climatology and natural variability of surface ocean carbonate chemistry in a variety of regions. Data are available at https://doi.org/10.7289/V5DB8043 and https://www.nodc.noaa.gov/ocads/oceans/Moorings/ndp097.html (Sutton et al., 2018).